首页 » Linux » smokeping安装测试

smokeping安装测试

　
暂无评论　515次浏览 
[root@linux-node2 ~]# yum -y install perl perl-Net-Telnet perl-Net-DNS perl-LDAP perl-libwww-perl perl-RadiusPerl perl-IO-Socket-SSL perl-Socket6 perl-CGI-SpeedyCGI perl-FCGI perl-CGI-SpeedCGI perl-Time-HiRes perl-ExtUtils-MakeMaker perl-RRD-Simple rrdtool rrdtool-perl curl fping echoping  httpd httpd-devel gcc make  wget libxml2-devel libpng-devel glib pango pango-devel freetype freetype-devel fontconfig cairo cairo-devel libart_lgpl libart_lgpl-devel mod_fastcgi screen #通过yum安装所依赖的库以及环境

 

[root@linux-node2 ~]# wget http://oss.oetiker.ch/smokeping/pub/smokeping-2.6.9.tar.gz #下载smokeping包
[root@linux-node2 src]# tar xf smokeping-2.6.9.tar.gz          #解压smokeping
[root@linux-node2 src]# cd smokeping-2.6.9        #进入smokeping目录
[root@linux-node2 smokeping-2.6.9]# ./setup/build-perl-modules.sh /usr/local/smokeping/thirdparty            #
[root@linux-node2 smokeping-2.6.9]# ./configure --prefix=/usr/local/smokeping       #编译smokeping到/usr/local

/usr/bin/gmake install
make install
[root@linux-node2 smokeping-2.6.9]# cd /usr/local/smokeping/         #进入smokeping目录
[root@linux-node2 smokeping]# mkdir cache data var         #创建三个目录
[root@linux-node2 smokeping]# touch /var/log/smokeping.log           #创建smokeping日志文件
[root@linux-node2 smokeping]# chown apache.apache cache/ data/ var/ /var/log/smokeping.log          #授权属主属组为apache
[root@linux-node2 smokeping]# cd /usr/local/smokeping/htdocs/     #进入smokeping下htdocs目录
[root@linux-node2 htdocs]# mv smokeping.fcgi.dist smokeping.fcgi   #修改smokeping文件名
[root@linux-node2 smokeping]# mv /usr/local/smokeping/etc/config.dist /usr/local/smokeping/etc/config   #修改smokeping下etc目录smokeping

修改smokeping配置文件



[root@linux-node2 smokeping]# sed -i 's#cgiurl   = http://some.url/smokeping.cgi#cgiurl   = http://10.0.0.8/smokeping.cgi#g' /usr/local/smokeping/etc/config
[root@linux-node2 smokeping]# sed -i 's#300#60#g' /usr/local/smokeping/etc/config        #默认检测时间300秒修改60秒
[root@linux-node2 smokeping]# sed -i 's#20#60#g' /usr/local/smokeping/etc/config #默认ping20次，修改为60秒ping60次
[root@linux-node2 ~]# vim /usr/local/smokeping/etc/config               #在presentation添加utf-8中文字符集
*** Presentation ***
charset = utf-8 #放在presentation下面就好，放在其他地方会报错。
[root@linux-node2 smokeping]# chmod 600 /usr/local/smokeping/etc/smokeping_secrets.dist        #修改密码权限为root只读

修改smokeping配置文件

在httpd.conf中添加以下配置文件就可以了，然后在浏览器中用http://ip/smokeping来访问，这里用到了Alias。

Alias /cache “/usr/local/smokeping/cache/”

Alias /cropper “/usr/local/smokeping/htdocs/cropper/”

Alias /smokeping “/usr/local/smokeping/htdocs/smokeping.fcgi”

<Directory “/usr/local/smokeping”>
AllowOverride None
Options All
AddHandler cgi-script .fcgi .cgi
Order allow,deny
Allow from all
AuthName “Smokeping”
AuthType Basic
AuthUserFile /usr/local/smokeping/htdocs/htpasswd
Require valid-user
DirectoryIndex smokeping.fcgi
</Directory>

设置验证密码和用户名

[root@linux-node2 htdocs]# htpasswd -c /usr/local/smokeping/htdocs/htpasswd smokeping  #设置登录密码认证  通过apache自带验证功能

New password:

Re-type new password:

设置smokeping启动脚本

[root@linux-node2 ~]# cat /etc/init.d/smokeping                 #smokeping启动脚本

#!/bin/bash

#

# chkconfig: 2345 80 05

# Description: Smokeping init.d script

# Write by : linux-Leon_xiedi

# Get function from functions library

. /etc/init.d/functions

# Start the service Smokeping

function start() {

echo -n “Starting Smokeping: “

/usr/local/smokeping/bin/smokeping >/dev/null 2>&1

### Create the lock file ###

                touch /var/lock/subsys/smokeping

success $”Smokeping startup”

echo

}

# Restart the service Smokeping

function stop() {

echo -n “Stopping Smokeping: “

kill -9 `ps ax |grep “/usr/local/smokeping/bin/smokeping” | grep -v grep | awk ‘{ print $1 }’` >/dev/null 2>&1

### Now, delete the lock file ###

rm -f /var/lock/subsys/smokeping

success $”Smokeping shutdown”

echo

}

#Show status about Smokeping

function status() {

NUM=”`ps -ef|grep smokeping|grep -v grep|wc -l`”

if [ “$NUM” == “0” ];then

echo “Smokeping is not run”

else

echo “Smokeping is running”

fi

 

}

### main logic ###

case “$1” in

start)

start

        ;;

stop)

        stop

        ;;

status)

status

        ;;

restart|reload)

        stop

start

;;

*)

echo $”Usage: $0 {start|stop|restart|reload|status}”

exit 1

esac

exit 0

添加需要监控的网站和节点

注意事项：

1）在/usr/local/smokeping/etc/config中添加

2）smokeping就这点不好，添加节点不能在前台Web页面添加，一定要在后台的配置文件中添加。

3）修改/usr/local/smokeping/etc/config 后，必须重启smokeping 程序，配置才会生效

4）smokeping 会根据配置文件config 在/usr/local/smokeping/data 之下添加moniter文件夹，其下包含website子文件夹

5）用vmware workstation的虚拟机测试有一点好处，workstation下的虚拟网卡可以设置出入的丢包率，适合smokeping做丢包测试, 经过测试smokeping检测出的丢包率与vmware worksation虚拟网卡设置的丢包率基本相同,也就是说smokeping 能够反应网络的真实状况。

添加监控节点示例：注意+是第一层，++是第二层，+++ 是第三层

把以下信息放在/usr/local/smokeping/etc/config文件中的最后。

+ Other

menu = 三大网络监控

title = 监控统计

++ dianxin

menu = 电信网络监控

title = 电信网络监控列表

host = /Other/dianxin/dianxin-bj /Other/dianxin/dianxin-hlj /Other/dianxin/dianxin-tj  /Other/dianxin/dianxin-sc  /Other/dianxin/dianxin-sh /Other/dianxin/dianxin-gz

+++ dianxin-bj

menu = 北京电信

title = 北京电信

alerts = someloss

host = 202.96.199.133

 

+++ dianxin-hlj

menu = 黑龙江电信

title = 黑龙江电信

alerts = someloss

host = 219.147.198.242

 

+++ dianxin-tj

menu = 天津电信

title = 天津电信

alerts = someloss

host = 219.150.32.132

 

+++ dianxin-sc

menu = 四川电信

title = 四川电信

alerts = someloss

host = 61.139.2.69

 

+++ dianxin-sh

menu = 上海电信

title = 上海电信

alerts = someloss

host = 116.228.111.118

 

+++ dianxin-gz

menu = 广东电信

title = 广东电信

alerts = someloss

host = 113.111.211.22

 

++ liantong

menu = 联通网络监控

title = 联通网络监控列表

host = /Other/liantong/liantong-bj /Other/liantong/liantong-hlj /Other/liantong/liantong-tj /Other/liantong/liantong-sc /Other/liantong/liantong-sh /Other/liantong/liantong-gz

 

+++ liantong-bj

menu = 北京联通

title = 北京联通

alerts = someloss

host = 61.135.169.121

 

+++ liantong-hlj

menu = 黑龙江联通

title = 黑龙江联通

alerts = someloss

host = 202.97.224.69

 

+++ liantong-tj

menu = 天津联通

title = 天津联通

alerts = someloss

host = 202.99.96.68

 

+++ liantong-sc

menu = 四川联通

title = 四川联通

alerts = someloss

host = 119.6.6.6

 

+++ liantong-sh

menu = 上海联通

title = 上海联通

alerts = someloss

host = 210.22.84.3

 

+++ liantong-gz

menu = 广东联通

title = 广东联通

alerts = someloss

host = 221.5.88.88

 

++ yidong

menu = 移动网络监控

title = 移动网络监控列表

host = /Other/yidong/yidong-bj /Other/yidong/yidong-hlj /Other/yidong/yidong-tj  /Other/yidong/yidong-sc  /Other/yidong/yidong-sh /Other/yidong/yidong-gz

 

+++ yidong-bj

menu = 北京移动

title = 北京移动

alerts = someloss

host = 221.130.33.52

 

+++ yidong-hlj

menu = 黑龙江移动

title = 黑龙江移动

alerts = someloss

host = 211.137.241.35

 

+++ yidong-tj

menu = 天津移动

title = 天津移动

alerts = someloss

host = 211.137.160.5

 

+++ yidong-sc

menu = 四川移动

title = 四川移动

alerts = someloss

host = 218.201.4.3

 

+++ yidong-sh

menu = 上海移动

title = 上海移动

alerts = someloss

host = 117.131.19.23

 

+++ yidong-gz

menu = 广东移动

title = 广东移动

alerts = someloss

host = 211.136.192.6

 

 

最后重启httpd和smokeping就可以访问了。

http://192.168.0.218:8080/smokeping

原文链接：smokeping安装测试，转载请注明来源！

赞 0